I finally have cruise and memory seats after auto to 5 speed manual swap!

[Guest]

1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

LexusNet Home Page: www.lexusnet.com
LexusNet Blog: www.lexusnet.com/blog

[22,087]

22,087 Posts in 9,070 Topics by 519 Members
Latest Member: Pathroopnsre

[ishootstuff]

What seems like forever ago, I posted this:

http://lexusnet.com/forums/index.php/topic,682.0.html

Well I finally took the time to figure this stuff out.

To make the memory seats work, you need to cut the gray wire on pin B6 of the Tilt\Telescopic ECU under the dash to the left of the steering wheel. Run 12v from a switched power source to the ECU side of the cut wire.

To get cruise working again, snip the black and white wire on pin 2 of the cruise ECU above the brake pedal. If you want the clutch to cancel the cruise, you'll need to wire it up the switch on the clutch pedal.

[1UZ-GS]

Yay lol.

[Peter_95]

i wanna do this..... i would like a detailed to the teeth DYI =)

haha. Good job bro....